TPEV-CC, TPUEV-CC
         The specification covers the
requirements of copper conductor polyethylene insulated and polyvinyl
chloride sheathed cable, to be used
for connecting subscriber equipments
inside the building.
   


TIEV-CC
        The specification covers the requirements of inside-outside station
wire used for direct connection from the
outside protector to the subscriber's set.


TJV
        The specification covers the requirements of jumper wire used for
cross connecting purposes and main
distribution frame wiring.





Remark : Other Telephone Cable Products. AP-SWA, ASP-FSF,DSAP-FSF

AP_FSF
        This cable is designed for use as a duct cable in either exchange area service or trunk service. The cable is foam-skin Polyethylene insulated, fully color coded, and fully filled with a filling compound to prevent the penetration and migration of water.



AP
        This specification covers the requirements for polyethylene insulation alpeth sheathed cable, intended for aerial installation by attachment to a separate support strand. The cable shall be used on subscriber and junction line.



AP(8)
        The specification covers the requirement for telephone cable 0.4, 0.5, 0.65 and 0.9 mm. Gauges copper conductor. Fully color coded even count polyethylene insulated twinned unit stranded, and alpeth sheathed for aerial installation. The cable shall be used on subscriber and junction line.


S-S DROP WIRE
        For extending an open wire line or for distribution cable pair from a pole or cable terminal to a building.

 
GROUND WIRE
        For connecting telephone connector to ground at subscriber's permises.

  >>For more infomation click here <<